HD-205
Introduction:
The unit is a 2 input 1 output DMX 512 Merger with 3 operation modes. It can be used for using 2 light controllers on one DMX line or for backup using a second lighting desk. You can get a 512 channels DMX controller.
On the front there are 3 LEDs indicating:
On unit has power and is working;
DMX A Valid DMX 512 is on input A;
DMX B Valid DMX 512 is on input B.
LTP operation:
The output DMX is generated using both data of input A and B.Each channel on A and B is compared and the last that has changed will be on the output.
Channel 1 from input A is compared with channel 1 of input B, 2A with 2B, 3A with 3B, and so on. This Operation is useful when using the lighting desk to control intelligent fixtures.
HTP operation:
The output DMX is generated using both data of input A and B. Each channel on A and B is compared and
The one with the highest value is on the output. Input B is shifted with offset (Display),
So channel 1 from input A is compared to channel (off set) from input B, 2A with (off set+1)B, and so on.
Example offset is 100: compare 1A with 101B, 2A with 102B…
This mode is useful for using two lighting desks (one for moving lights and one for dimmer) on one DMX line.
Priority operation:
The output DMX is generated using DMX input A, but only if the input A has valid DMX 512. Otherwise
DMX input B will be on the output. This mode is useful as backup. connect the main lighting desk to input
A and a backup desk to input B. If the main desk fails, the merger will switch over to the backup desk (with
A time of 1 second).
Technique data：
Power input:………………………………………AC 230V 50Hz, 10W.
Dimension:…………………………………………482×188×44mm （L×W×H）
Weight:………………….…………………………..2.6kg
DMX IN:……………………………………………3Pin & 5Pin XRL MALE
DMX OUT………………………………………….3Pin & 5Pin XRL FEMALE
