HD-205

    Introduction:
    
     The unit is a 2 input 1 output DMX 512 Merger with 3 operation modes.                                                                                                                                                                                                                                                                                     It can be used for using 2 light controllers on one DMX line or for backup using a second lighting desk.                                                                                                                         You can get a 512 channels DMX controller.

 

     On the front there are 3 LEDs indicating:
   On unit has power and is working;
       DMX A Valid DMX 512 is on input A;
       DMX B Valid DMX 512 is on input B.
 
   
   LTP operation:
            The output DMX is generated using both data of input A and B.Each channel on A and B is compared and the last that has changed will be on the output.
            Channel 1 from input A is compared with channel 1 of input B, 2A with 2B, 3A with 3B, and so on.                                                                                                                               This Operation is useful when using the lighting desk to control intelligent fixtures.
  HTP operation:
           The output DMX is generated using both data of input A and B. Each channel on A and B is compared and
           The one with the highest value is on the output. Input B is shifted with offset (Display),
           So channel 1 from input A is compared to channel (off set) from input B, 2A with (off set+1)B, and so on.
           Example offset is 100: compare 1A with 101B, 2A with 102B…
           This mode is useful for using two lighting desks (one for moving lights and one for dimmer) on one DMX line.
   Priority operation:
             The output DMX is generated using DMX input A, but only if the input A has valid DMX 512. Otherwise
             DMX input B will be on the output. This mode is useful as backup. connect the main lighting desk to input
             A and a backup desk to input B. If the main desk fails, the merger will switch over to the backup desk (with
             A time of 1 second).
Technique data
              Power input:………………………………………AC 230V 50Hz, 10W.
              Dimension:…………………………………………482×188×44mm L×W×H
              Weight:………………….…………………………..2.6kg
              DMX IN:……………………………………………3Pin & 5Pin XRL MALE
              DMX OUT………………………………………….3Pin & 5Pin XRL FEMALE

Unit 1105,11/F.,Tower 1, Lippo Centre, No.89 Queensway, Admiralty, Hongkong.

Gong Zai Ling 2 Floor ,Qi She industrial estate ,JunHe town, BaiYun district, GuangZhou, China.

 

P.C.: 510400

Tel: +86 020 86260903

Fax: +86 020 86264401

info@cngdjs.com


本网站由阿里云提供云计算及安全服务 Powered by CloudDream