INTRODUCTION:
This
unit is DMX recorder and player controller. There are 5 scenes which you can
record from a DMX controller, then control any DMX device. Each scene has
standard 512 channels. There is an additional relay control which is operated
by AUX switch. WC-5LP is normally in 120 type size, or MS special size.
Recording
scene:
1.
Plug in power DC-12V then confirm the unit is
in OFF.
2.
Connect the DMX controller to the unit via
male XLR socket.
3.
Push the “learning” button on back side.
4.
Running the scene on DMX controller which is
you want to record.
5.
Select scene no. 1-5 on this unit. Then push
this no. then you will see LED flash 3 times which means the scene is recorded.
Repeating
step 4 to step 5, you will get maximum of 5 scenes.
6. When all scenes are recorder, please push
the “learning” switch once more in order to go into “play” mode.
Scene operating:
1.
Push ON button then you can select button 1-5
which is the recorded scene which you want to be running.
2.
In running you can use UP and DOWN button to control
output.
AUX
control: push AUX button you can control
relay contact.
OFF
control: push OFF you can turn off
control.
RS-232 function:
Baud rate: 38400
Power off: WC-5LP
POWER 0
Power on: WC-5LP POWER
1
........
Set channel data: WC-5LP CH: 001-512/000-255
AUX
Control: WC-5LP AUX 1 / WC-5LP AUX 0
Output
control:
WC-5LP BRIGHTNESS U
WC-5LP BRIGHTNESS D
WC-5LP BRIGHTNESS 255
WC-5LP BRIGHTNESS 128
WC-5LP BRIGHTNESS
000